Filter
Top Products
To re-use wash water
1. Set the Cycle Control Knob on
SUDS RETURN. Do not add the load
items at this time.
2. Pull the Cycle Control Knob out. The
washer will pump most of the wash
3.
4.
5.
6.
7.
8.
water from the storage tub back into
the washer basket.
When the wash water has pumped
back into the washer, push in the
Cycle Control Knob.
Add about % the recommended
amount of detergent.
Add the load items.
Turn the Cycle Control Knob clock-
wise to the desired cycle and wash
time.
Pull out the Cycle Control Knob to
start the washer.
About one inch of wash water will
remain in the tub. The water will con-
tain soils that have settled out. Drain
the storage tub. The end of the suds
return hose has a plastic strainer to
prevent objects from being pulled
into the washer during SUDS
RETURN.