Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a soried load in the washer before starting it.
1 .
Select a LOAD SIZE
2
Select
. WATER TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
Set the knob on or between EX
SMALL (a few items] and EX LARGE
(a full load).
l
Match the wash and rinse water
temperature to the type of fabrics and
soils being washed.
l
This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature] selection.
Recommended wash temperatures
can be found in your “Laundry Guide:’
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
A
CAUTION:
in the water. Too big a load or too
-DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing of load items.
‘Approximate ,
LARGE
fill with load.
m-
(17.3 gal./655 L)*
(14.7 gal./557 L)’
I
(12.1 gal./45.8 L)’
E~SMALL (9.5 gal.136.0 L)’
4