Filter
Top Products
Starting your washer
I. Measure and add detergent
Before starting your washer: 2. Place sorted load in washer.
3. Start washer
Select a
1. LOAD
SIZE
Select WATER
2.
TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
Set the knob anywhere on or
between EX SMALL [a few items)
and LARGE [a full loaa].
NOTE: Use the LARGE water level
for best permanent press results.
l
Match the wash and rinse water
temperatures to the type of fobrrcs
and soils berng washed.
l
This drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your “Laundry Guide’,
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
0
DO NOT
OVERLOAD WASHER.
(17.3 galU65.5 L)’
‘Approximate
(14.7 gals./557 L)’
(12.1 galsJ45.8 L)’
fill with load.
(9 5 galsI36.0 L)’
4