Filter
Top Products
Other operating instructions
For a rinse and spin
For a drain and spin
You may need an extra rinse and
Your washer can be set tp drain
spin for heavily soiled loads which
and spin out water.
need more detergent. (Extra de-
l
Push Control Knob in.
tergent can require an extra rinse.)
l
Turn clockwise to the bar just before
l
Push Control Knob in.
OFF In any cycle. See above
l
Turn clockwise to any.on the dial
drawing.
See above drawing.
l
Pull Control Knob out.
l
Pull Control Knob out.
. The washer WIII drain
OndSpln
l
The washer will fill to selected
level; agitate 2 minutes; drain
and spin.
For agitation and spin speeds in each cycle, see pages 6- 9
For a soak or pre-wash
For best results, use warm water
for soaking or pre-washing stalned
laundry. Hot water can set stains.
l
Use recommended amount of
detergent or pre-soa k product.
l
Push Control Knob in.
l
Turn clockwise to point at a number
in the SOAK Cycle...use the 6-minutes
mark for a pre-wash:
l
Pull Control Knob out to start washer.
l
When the cycle is over, add de-
tergent for the next selected wash
cycle. The SOAK Cycle should
always be followed by a Wash
Cycle.
Important: See additional care
intormation on page 7 of your
“Laundry Guide!’
l
Set the washer and start the next
selected wash cycle.
‘To start soak or pre-wash with agitation, the Cycle Control Knob
must point to a number in the SOAK Cycle.