Filter
Top Products
Starting your washer
Before starting your washer:
1 Measure and add deterqent
2 Place sorted load in wa&er
3 Start washer
Select a
1. LOAD SIZE
l
Turn the knob to point at a setting
that describes the size of load you
l
Match the wash water temperature
want to wash.
to the type of fabrics and soils being
washed.
l
Set the knob on or between EX
SMALL (a few items) and LARGE
(a full load).
l
All rinses are cold
Recommended wash temperatures
can be found in your”Laundry Guide.”
NOTE: Use the LARGE water level
for best permanent press results.
Select WATER
2.
TEMPERATIJRIES
;- ”
2 AA”-h---- ~_..~. ___-... ~I- ___-
A--.-~~---4k.&i..~*r.~~ L
i LOAD SIZES AND WATER LEVELS
i
For best cleaning results, the
load must be able to move freely
CAUTION :
i
in the water. Too big a load or too
DO NOT
B
little water can cause wear or
tearing of load items.
OVERLOAD WASIHER.
-
Select CYCLE and WASH TIME;
3.
Start the washer
A.
Push in the Control Knob and
turn it to the right. It must be
pushed II- and turned only
clockwlse
6. Stop on a number in the Cycle
you want. The numbers are min-
utes of wash time. The drawing
shows.10 minutes of agitation in
the REGULAR Cycle.
C.
Start the washer by pulling out
the Control Knob. The washer
will fill to the level you set with
wash water of the selected
temperature. ARer filling, the
washer will agitate for the
selected number of minutes
D.
To stop the washer at any time
push in the Control Knob. To
restart the washer, pull out the
Control Knob.