Filter
Top Products
Starting your washer
Before starting your washer:
1. Measure and add detergent
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2.
TEMPERATURES
l
Turn the knob to point at a setting
l
Match the wash water temperature
that describes the size of load you
to the type of fabrics and soils being
wont to wash.
washed.
l
Set the knob on or between EX
SMALL [a few items) and LARGE
(a full load).
l
All rinses are cold.
NOTE: Use the LARGE water level
for best permanent press resufts.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
CAUTION :
DO NOT
OVERLOAD WASHER.
‘Approximate
fill with load.
LARGE (17.3 gals./655 L)’
MED (13.4 gaW50.8 L)’
EX SMALL (9.5 galsJ36.0 L)’
4