Filter
Top Products
Winterizing
Because some water stays in the washer, freezing
can cause a lot of damage. If your washer is
stored or moved during the cold weather...
1.
Shut off both water
faucets. Disconnect
and drain water
inlet hoses.
2. Put a quart of
automotive-type
antifreeze in the
basket.
ON
To use the washer again...
1.
Flush water pipes and hoses.
2. Connect hoses to the washer
3. Turn on the water faucets.
3. Set the washer for a
DRAIN and SPIN (see
page IO]. Let it run
for about 30 seconds
to mix the antifreeze
and water.
4. Run the washer
through a com-
plete cycle with
one cup of deter-
gent to clean out
the antifreeze.
12