Filter
Top Products
Starting your washer
Before starting your washer:
; 1. Measure and add detergent.
9
:--/
2. Place sorted load in washer.
3. Start washer.
DO NOT OVERLOAD WASHER
See pages 6 and 7 in
your “Laundry Guide:’
Select a
1. LOAD SIZE
9 Turn the knob to point at a setting
l
Match the wash water temperature
that describes the size of load you
to the type of fabrics and soil being
want to wash.
washed.
l
Set the knob on EX SMALL (a few
items) or LARGE (a full load).
NOTE: Use the LARGE water level for
best permanent press results.
l
All rinses are cold. Cold rinses save
energy and help prevent wrinkles
from setting into fabrics.
DO NOT LOAD
ABOVE CLOTHES
GUARD
mm TEMPERATURES
LOAD SIZES AND WATER LEVELS
$
For best cleaning results, the load
must be able to move freely in the
water. Too big a load or too little water
can tear items.
IMPORTANT: The EX SMALL setting in the
REG/HEAVY Cycle may cause water
to splash over the tub. If this happens,
move the Load Size Selector to a
higher water level.
(9.5 galsJ36.0 L)*
‘Approximate fill with load.