Filter
Top Products
starting
your washer
Before starting your washer:
VI. Measure and add detergent.
r
’ 2. Place sorted load in washer.
3. Start washer
DO NOT OVERLOAD WASHER
See pages 6 and 7 in
Your “Laundry Guide”
Select a
1. LOAD SIZE
l
Turn the knob to point to the setting
l
Match the wash water temperature
that describes the size of load You
to the type of fabrics and soils being
want to wash.
washed
l
Set the knob on EX SMALL (a few
items) or LARGE (a full load).
l
All rinses are cold Cold rinses save
energy and help prevent wrinkles
from setting into fabrrcs
NOTE: Use the LARGE water level
for best permanent press results.
DO NOT LOAD
ABOVE CLOTHES
GUARD
Select WATER
2.
TEMPERATURES
LOAD SIZES AND
WATER LEVELS
IMPORTANT: The EX SMALL setting in
the REGiHEAVY Cycle may cause
water to splash over the tub. If this
For best cleaning results, the
happens, move the Load Size
load must be able to move freely
Selector to a higher water level
In the water. Too big a load or too
little water can tear items.
LARGE
(17.2 gals. 65.1 L)’
EX SMALL
(9.5 gals36.0 L)*