Filter
Top Products
Other operating instructions
For a rinse and spin
For a drain and spin
You may need an extra rinse and
Your washer can be set to drain and
spin for heavily soiled loads which spin out water.
need more detergent. (Extra detergent
1. push Control Knob in,
can require an extra rinse.)
1. Push Control Knob in.
2. Turn clockwise to the bar just before
the OFF area in any cycle. See
2. Turn clockwise to any
l
on the dial. above drawing.
See above drawing.
3. Pull Control Knob out. The washer
3. Pull Control Knob out. The washer will drain and spin.
will fill to selected level; agitate 2
minutes; drain and spin.
For agitation and spin speeds in each cycle, see pages 6-9.
For best results, use warm water
for soa king or pre-washing stained
laundry. Hot water can set stains.
1. Use recommended amount of
detergent or pre-soa k product.
2. Push Control Knob in.
3. Turn clockwise to point to the
number in the SOAK Cycle.
4. Pull Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected
wash cycle. The SOAK Cycle
should always be followed by
a Wash Cycle.
Important: See addltlonal care
Information In your “laundry
Guide!’
*To start soak with agitation, the Control Knob
must point to a number in the SOAK Cycle.
10