Other Operating Instructions
Rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and
spin.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to one of the dots on the dial, as
illustrated.
3. Pull Cycle Control Knob out. The
washer will fill to selected level,
agitate 2 minutes, drain and spin.
Drain and spin
A drain and spin may help shorten
drying times for some heavy fabrics or
special-care items by removing excess
water.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to the bar just before the OFF area
on the dial, as illustrated.
3. Pull Cycle Control Knob out.
The washer will drain and spin.
Soak Cycle
For best results, use warm water for
soaking stained laundry. Hot water can
set stains.
1. Use recommended amount of
detergent or presoak product.
2. Push Cycle Control Knob in.
3. Turn clockwise until indicator points
to the number in the SOAK Cycle.
4. Pull Cycle Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected wash
cycle. The SOAK Cycle should al-
ways be followed by a wash cycle.
NOTE: See the Laundry Guide for
additional soaking information.
9