Filter
Top Products
If you need service or assistance,
we suggest you follow these four steps:
L Before calling for
assistance...
Performance problems often resuli
from little things you can find and fix
yourself without tools of any kind
If your washer does not fill:
l
Is the power supply cord plugged
into a live circuit with the proper
voltage?
l
Have you checked your home’s
main fuses or circuit breaker box?
l
Are the water supply hoses kinked?
l
Is the Cycle Control Knob set and
pulled out?
If your washer does not spin:
l
Is the lid closed?
l
Is the power supply cord plugged
into a live circuit with the proper
voltage?
l
Have you checked your home’s
main fuses or circuit breaker box?
If your washer stops during the per-
manent press cycle:
l
Remember, the washer will stop for
about 2 minutes after the
partial
drain during the cool-down
period
in this cycle.
If your washer fills and drains with-
out running:
l
Make sure that the Cycle Control
Knob is pointing to a number in the
cycle.
Make sure the drain hose is higher
than the water level in the washer. If
it isn’t...
l
The washer may seem to be drain-
ing during wash and rinse cycles.
l
Water can siphon out. (See “lnstalla-
tion Instructions!‘)
l
Are both water faucets Open?
13