Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in fhe washer before starting it.
1
2
Select
. Select a LOAD SIZE
. WATER TEMPERATURES
l Turn the knob to point at a setting
l Match the wash and rinse water
that describes the size of load you
temperature to the type of fabrics and
want to wash.
soils being washed.
l The water level can be set for
l All rinses are cold. Cold rinses save
EX SMALL (a few items), MED or
energy and help prevent wrinkles from
LARGE (a full load).
setting into fabrics.
NOTE: Use the LARGE
water level
for besf permanent press results.
Recommended wash temperatures
can be found in your “Laundry Guide.”
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
0
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate
fill with load.
LARGE (17.3
gals./655 L)*
MED (13.4
galsJ50.8 L]’
EX SMALL (9.5
galsI36.0 L)*
4