Whirlpool LA38OOXK Washer User Manual


 
For a Pre Wash
Use this setting TV’ a shiorter
SOAK CYCLE (no rinse‘ Jse enough
detergent for a sIngIt; .LJS~ 4dd the
ioad
l
Set the
LOAD SIZE SELECTOR.
l
Push the Cycle Con*rcl Knob In and
turn it to the 12-mrnufe mark In the
SOAK CYCLE
“?. . . .j’L’ .
SOAh
l
Pull the Control Knob out to start the
washer
l
The washer will fill, agitate for two
mrnutes, soak for eight mrnutes, agi-
tate for two more, and ‘hen drain and
spin (See SOAK CYCLE description
on pagea )
l
After filling, the washer may
pause before starting to agitate.
For Rinsing Only
Loads with towels, diapers,
jeans or heavrly soiled items often
need extra detergent Extra detergent
can require an extra rinse
Your washer can be set to rinse
only Use the settiny for an extra rrnse,
or for laundry that orI\/ needs a rinse
and spin
Cycle Control Knob, turn the pointer to
one of those asterisks and pull the
Control Knob out, the washer
WIII fill,
agrtate, drain and spin
The washer fills with cold water
Water level and temperature can’t
be adjusted in this setting
For Spinning Only
There may be times when you
wart to drain out all the wash water
and start over. To stop the wasner at
any time, just push in on the Cycle
Cortrol Knob
To set the washer so it drains
and spins water out of the load, push
In on the Control Knob, turn to the right
(clockwise) so the pointer
IS
touching
the bar just before OFF in any cycle
The washer WIII drain, spin out
water and stop.
There
IS
an ‘asterlsk( ) just after
the numbers in REGULAR HEAVY and
SHORT cycles If vou push In on the