Filter
Top Products
Starting your washer
Before starting
your washer:
1. Measure and add detergent
2. Place sot-ted load in washer.
3. Start the washer.
1 Select CYCLE and WASH TIME;
L Start the washer
Fill Area
A. Push In the Control Knob and
turn It to the right.
It must be
pushed in and turned only
clockwise.
B.
Stop on a number in the cycle you
want. The numbers are the minutes
of wash time. The drawing shows
6 minutes of agitation in the REG-
ULAR NORMAL Cycle.
NOTE:
The
washer will fill only when the knob
points to a FILL area.
C. Start the washer by pulling out
D. To stop the washer at any tlme,
the Control Knob.
After filling, the
push In the Control Knob.
To
washer will agitate for the
restart the washer, pull out the
selected number of minutes.
Control Knob.
4