Filter
Top Products
Starting your washer
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select CYCLE and WASH TIME;
1.
Start the washer
B.
Stop on a number in the cycle
you want. The numbers are minutes of
wash time. The drawing shows 8
minutes of agitation in the REGULAR
HEAVY Cycle. NOTE: In the REGULAR
HEAVY and SHORT Cycles, the washer
will fill only when the knob points to a
“fill” area.
A.
Push in the Control Knob and
turn it to the right. It must be pushed
in and turned only clockwise.
D.
To stop the washer at any time,
push in the Control Knob. To restart
the washer, pull out the Control Knob.
C.
Start the washer by pulling out
the Control Knob.After filling,the
washer will agitate for the selected
number of minutes.
To set the controls for a rinse and spin (second rinse), a drain and
4
spin, or a soak or pre-wash, see page 8.