Filter
Top Products
2
To Select a WASH
. WATER TEMPERATURE
HOT WATER can be selected by turn-
ing the Control Knob to 12 or 14 minutes
in the REGULAR HEAVY Cycle.
All rinses use cold water. This saves
energy and helps prevent wrinkles
from setting into fabrics.
3
. To Select a WATER LEVEL
WARM WATER can be selected by
turning the Control Knob to 8 or 10
minutes in the REGULAR HEAVY Cycle.
l
A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 4 or 6 minutes setting in that
cycle.
HIGH WATER LEVEL. The washer will
automatically fill to its highest level,
(about 17.2 galsI65.1 L), when the
Control Knob points to a FILL area.
NOTE: The washer will fill only when
the knob points to a FILL area.
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets
it for a shorter wash time.
1. Push the Control Knob in and turn it
clockwise to FIN area in the cycle
you want.
2. Pull the Control Knob out; the washel
will start to fill.
3. When the washer reaches the
desired water level, push in the
Control Knob and slowly turn it past
the FILL area. Pull out the Control
Knob to start the washer.
For all rinses, the washer fills to its
highest level with cold water.
5