Filter
Top Products
To select a
2.
WASH WATER TEMPERATURE
HOT WATER con be selected only
in the REGULAR HEAVY Cycle Turn the
Control Knob to12 or14 minutes In the
REGULAR HEAVY Cycle
All rinses use cold water. This saves
energy and helps prevent wrinkles
from setting into fabrics.
To select a
3.
WATER LEVEL
HIGH WATER LEVEL. The washer will
automatically fill to its highest level,
(about17.2 gals 165.1 L), when the
Control Knob points to a FILL area
WARM WATER can be selected by
turning the Control Knob to 8 or10 min-
utes in the REGULAR HEAVY Cycle.
l
A worm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 or 8 mrnute setting in that cycle.
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets it
for a shorter wash time.
1. Push the Control Knob in and turn it
clockwrse to Q FILL area in the cycle
you wont.
2. Pull the Control Knob out; the washer
will start to fill
3. When the washer reaches the de-
sired water level, push in the Control
Knob and slowly turn it post the FILL
area Pull out the Control Knob to
start the washer.
For all rinses, the washer fills to its
highest level with cold water.