Filter
Top Products
Using
Your Washer
Start your washer after you put in
detergent, the load, and any other
laundry aids according to InformatIon
on page 3
1.
Set the TEMPERATURE SELECTOR.
l
Match the wash water temperature to
the type of fabrics and SOIIS betng
washed All rinses are cold
2. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob In and
turn It to the right (clockwlse)
l
Stop when the pointer IS on the nu’n
Ser of q/flutes you want in the cycle you
want NOTE: In the REGULAR HEAVY
and KNIT GENTLE Cycles, the washer WIII
fill only If the Control Knob points to a fill
area
l
Instructions on which cycle to use for
each fabric type are under the IId
l
To start the washer, pull the Cycle
Control Knob out When the cycle
IS
over, the washer
will
stop
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull It out to restart the washer
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then
turn the Control Knob to the right (clock-
wise) to the setting you want. Pull the
knob out to start the washer