Whirlpool L4132V Washer User Manual


 
Using your washer
Water-level
selecctor
Temperature
selector
Agitator
The drawings in this book may vary
slightly from your washer model. They
are designed to show the different
features of all the models covered by
this book. Your model may not include
all the features shown.
A. Sort the load
Sort items by lint-givers (chenille, bath
towels) and lint-takers (corduroy,
permanent press and synthetics).
Sort by fabric and construction (cottons,
knits and delicate items).
Sort by color (white, colorfast and
non-colorfast).
Sort by amount of soil (heavy, normal
and light).
B. Load the washer
(For specific loading recommendations
see Page 7.)
Drop items in loosely and evenly.
For best cleaning and wrinkle-free
results, items should move freely in
wash water. (Permanent press and
synthetic knits should have more room
to move in the water than towels, jeans,
etc.)
Laundry Tip
Do Not overload washer.
Overloading or packing can cause
poor cleaning, increased wrinkling,
excessive lint and can wear out
items faster.
Set water level at LARGE or
EX LARGE for the best permanent
press results.
Cycle control
knob
Model and serial
number plate
(under lid)
-Bleach dispenser
(not available
on
AL4132
and AX51331
/ Tub
Lint filter
(not shown;
not
available
on
AJi4132V)
C. Select water-level and
load size
Set water
level selector knob to the
level that describes the size of your
load. EX SMALL or SMALL, for a few
items; EX LARGE or LARGE, for full
load. (See Pages 5-6 for specific
information.) To change water level
after the washer has started to fill, turn
selector knob to RESET and then to
desired water level.
D. Select water temperature
The top temperature on the
temperature selector is the wash
selection; the bottom temperature is
the rinse.
Set water temperature level according
to fabric label or the amount of soil to be
washed.
Page 3