Whirlpool W10133484A Washer User Manual


 
14
Extra Rinse
An extra rinse can be used to ensure the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse.
Rinse Hold
Use this option to avoid wrinkling of your laundry when a load
cannot be removed from the washer immediately. The wash cycle
is paused before the final drain and spin phase so that the
laundry stays in the rinse water until the cycle is continued. This
provides optimal wrinkle care of your wet laundry. The door stays
locked during the Rinse Hold cycle and the indicator light is
flashing. Press RINSE HOLD to finish the cycle and unload the
washer.
Modifiers
Preset cycle settings of Water Temperature, Spin Speed and
Cycle Time can be changed. You can change a modifier after
starting a cycle anytime before the selected modifier begins. Not
all modifiers are available with all cycles and options.
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
To change the loudness of the End of Cycle Signal, select
END OF CYCLE SIGNAL.
To change cycle time, select SOIL LEVEL button.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
In wash water temperatures colder than 70°F (21°C), detergents
do not dissolve well. Soils may be difficult to remove.
ACCUWASH Automatic Temperature Control
The ACCUWASH control electronically senses and maintains a
uniform water temperature. ACCUWASH control regulates
incoming hot and cold water. ACCUWASH control is
automatically turned On when a cycle is selected. (See Preset
cycle settings in Cycles.)
ACCUWASH control ensures consistent cleaning.
ACCUWASH control works for all wash and rinse
temperature settings.
Laundry Guide
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
Wash Water Temperature Suggested Fabrics
HOT
122°F (50°C) or above
Whites and pastels
Heavy soils
WARM
104°F (40°C)
Bright colors
Moderate to light soils
COLD
77°F (25°C)
Colors that bleed or fade
Light soils
CYCLE SUGGESTED LOAD TYPE EXTRA RINSE RINSE HOLD
Whitest Whites
Heavily soiled white fabrics
Heavy Duty
Heavily to normally soiled underwear, towels, shirts, etc.
Normal/Casual
Normally soiled blouses, shirts, overalls, etc., made
of polyester, nylon, cotton, linen, or cotton blends
Delicate
Curtains and delicate clothing, dresses, skirts, shirts,
and blouses