Whirlpool 3HLER5437JQ0 Clothes Dryer User Manual


 
6
DRYER USE
Starting Your Dryer
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1.
Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
2.
Turn the Cycle Control knob to the recommended cycle for
the type of load being dried. Use the Energy Preferred
Automatic Setting (
*
) to dry most heavyweight and medium
weight loads. See “Drying, Cycle and Temperature Tips.”
3.
Select a temperature setting on models with a Temp/Fabric
selector. The cycle descriptions include temperature setting
suggestions.
NOTE:
The temperature selector is part of the Cycle Control
knob on some models.
4.
Select the End of Cycle Signal, if available. The signal is
helpful when drying permanent press or synthetics. Promptly
remove these items from the dryer at the end of the cycle to
prevent wrinkles.
On some models the End of Cycle Signal is part of the Start
button. Turn the Start button to ON or OFF.
5.
Push the START button.
Stopping and Restarting
You can stop your dryer any time during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE:
The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1.
Close the door.
2.
Select a new cycle and temperature (if desired).
3.
Push START.
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.