Filter
Top Products
9
Timed Drying Cycle
Use the Timed Drying cycle to complete drying if items are still
damp after the automatic cycle.
Timed Drying is also useful for:
■ Heavyweight and bulky items, such as bedspreads and work
clothes and large loads that require a long drying time. Set
the Temperature selector to a heat setting that matches the
care label directions.
■ Lightweight items, such as lingerie, blouses, and knits that
require a short drying time. Set the Temperature selector at
Low or Ex-Low heat.
Heavy Dry
Use this setting to thoroughly dry large or heavy items, such as
thick bath towels or robes. Set the Temperature selector at High
heat.
DRYEL
®
fabric care system
When using DRYEL fabric care, select the DRYEL cycle setting
and the DRYEL temperature setting. DRYEL fabric care, when
used in accordance with the manufacturer’s directions, has been
tested and approved for use in full-size dryers built by Whirlpool
Corporation.
Damp Dry
Use this setting to dry items to damp level or to dry items that do
not require an entire drying cycle. Damp dry items such as jeans
(to prevent stiffness) or cotton clothes (to make pressing easier).
set the Temperature selector at High heat.
TUMBLE PRESS
®
setting
Use this setting to remove wrinkles from items, such as clothes
packed in a suitcase or items wrinkled from being left in the dryer
too long. Set the Temperature selector at Low or Medium heat,
depending on the fabrics in your load.
Temperature Settings
The Temperature selector allows you to select a drying
temperature that matches the fabrics in your load and provides
for shortest, most efficient drying time..
RESOURCE SAVER™ setting
The RESOURCE SAVER temperature setting saves energy by
using electronic sensors to carefully monitor and regulate the
amount of heat inside the dryer. When used with the
ACCUDRY™ automatic drying cycle (see “ACCUDRY™
Automatic Drying Cycle”), the RESOURCE SAVER setting
provides the best drying efficiency while saving energy.
■ Use the RESOURCE SAVER
setting with the Energy
Preferred Automatic Setting (
*
) to save the most energy when
drying an average size load of lightweight to medium weight
items, such as sheets, shirts and dresses.
■ Use the RESOURCE SAVER setting with the Very Dry cycle to
save energy when drying a large load of medium weight to
heavyweight items, such as work clothes or cotton jerseys.
■ We do not recommend use of the RESOURCE SAVER setting
when drying large loads of extra heavy or bulky items, such
as jeans, thick cotton towels, or quilts. To thoroughly dry
these heavyweight items, select a High heat setting.
NOTE:
The energy-saving feature of the RESOURCE SAVER
setting is not as effective when using the Timed Drying cycle.
SENSEON™ Drying System
The SENSEON drying system uses electronic sensors to detect
the size and types of fabrics in your load to provide the shortest
drying time. When used with the ACCUDRY™ automatic drying
cycle (see “ACCUDRY™ Automatic Drying Cycle”), the
SENSEON setting provides the shortest drying time and best
fabric care for your load.
■ The Normal setting, when used with the Energy Preferred
Automatic Setting (
*
), provides medium heat to evenly dry
sturdy casual clothes, such as khakis and cotton jerseys, in
the shortest time. When used with the Timed Drying cycle,
Normal provides medium heat for your selected drying time.
■ The High setting, when used with the Energy Preferred
Automatic Setting (
*
), provides high heat to thoroughly dry
heavyweight items, such as jeans, corduroys or work clothes,
in the shortest time. When used with the Timed Drying cycle,
High provides high heat for your selected drying time.
Medium/Permanent Press
Select this medium temperature setting to dry lightweight to
medium weight to synthetic or no-iron items, such as sheets,
shirts or dresses.
Low/Knits
Select this low temperature setting to gently dry washable knit
items, such as blouses, sweaters and lingerie.
Extra Low/Delicate
Select this extra low temperature setting to gently dry special
care items, such as exercise wear, sheer curtains or lace.