Filter
Top Products
Selecting a cycle
You will find information you need to make
correct cycle, time, and temperature decisions
in this section.
l Pages 7 to 11: Use these pages to find
additional information about drying cycles
that may be on your model.
l Pages 12 to 16: Find the page that has a
control panel similar to yours. Use the
information on this page to guide you when
making drying selections.
NOTE: Your model will not look exactly like the
illustrations.
lt your dryer has a Cycle Control Knob with
temperatures bultt-In:
1. Select a cycle by turning the Cycle Control
Knob either way to a desired time or setting.
2. Stop when the indicator on the knob’s outer
ring points to the cycle and temperature you
want.
3. Push the Start Button.
OR
Cycle control knob with 3 temperature settings
lt your dryer has a Cycle Control Knob and
a Temperature Selector:
Match your drying temperature to the type of
fabric being dried. Your dryer has a knob, push
button, or CLEAN TOUCH” Temperature
Selector.
1. Select a cycle by turning the Cycle Control
Knob either way to a desired time or setting.
2. Stop when the indicator on the knob’s outer
ring points to the cycle you want.
3. Set the Temperature Selector to the desired
temperature setting.
4. Push the Start Button.
Cycle control knob
TemPeratura selector
CLEAN TOUCH”
Push button
temperature selector- bmparatura s0l=tor
Changlng a selectlon:
an indicator appears
over temperature
1. Turn the Cycle Control Knob to a new setting.
(If your dryer has a Temperature Selector, set
the Selector to the new desired temperature.)
2. Push the Start Button, if necessary.
saktcted
7