Filter
Top Products
COMMERCIAL DRYER SPECIFICATIONS
DRYER SPECIFICATIONS
MODEL NUMBER CEM2750TQ
††
CGM2751TQ
†
GENERAL INFORMATION
Stainless-Look Push Button Console, white
enamel drum, porcelain finish top, powdered
paint cabinet, front panel lock blank factory
installed, removable indoor lint filter,
improved meter case. 4-way venting
Metercase Model
Factory Installed
Coin Slide
and Coin Box,
$0 – 2 per Cycle,
$1.00 Factory Preset
Metercase Model
Factory Installed
Coin Slide
and Coin Box,
$0 – 2 per Cycle,
$1.00 Factory Preset
ELECTRICAL REQUIREMENTS
3-Wire Nominal 240/
208-Volt, 60 Hz, A.C.
Standard 30 Amps
Breaker/Fuse Branch
Circuit per Dryer (Subject
to Local Codes)
Nominal, 120-Volt, 60Hz
A.C., Standard 15 Amps
Breaker/Fuse Branch
Circuit per Dryer
(Subject to Local Codes)
MOTOR
1
⁄3 HP Single Speed
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
1
⁄3 HP Single Speed
Motor with Built-In
Overload Protector
5.9 Amps Max Rating
HEATER TYPE
ELECTRIC GAS
**
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all
Dryer Models)
Heater Rated
at 5600 Watts
22,000 BTUh
Natural Gas
OPERATIONAL AMPERAGE
(Does not Include Control or Gas Valve)
Motor — 4.0 Amps No
load Heater 23.33 Amps
at 240 Volt 27.33 Total
Motor — 4.0 Amps
No load
DIMENSIONS
See Illustration Below
43" H
*
, 27" W, 28.5" D 43" H
*
, 27" W, 28.5" D
SHIPPING WEIGHT (EST.)
134 Lbs. 135 Lbs.
DRUM VOLUME
7.4 Cu. Ft. 7.4 Cu. Ft.
*Height at meter case top. **Burner orifices are available for manufactured, natural, mixed, and LP gas with
varying BTU ratings.
†
LP conversion Kit: 49572.
††
Power cords on electric models sold separately.
Energy information is available online at www.whirlpoolcommerciallaundry.com/products.
DRYER FRONT VIEW
DRYER BACK VIEW
Exhaust Information
All dryers require the equivalent
of a 4-inch diameter exhaust duct.
Rigid metal duct is recommended.
Failure to properly exhaust the dryer
will result in improper operation.
27" & 29" Dryer Venting Requirements
# of 90° turns 4" Hood 2
1
⁄2" Hood
Maximum length of 4" diameter rigid metal duct
0 64 Ft. 58 Ft.
1 54 Ft. 48 Ft.
2 44 Ft. 38 Ft.
3 35 Ft. 29 Ft.
4 27 Ft. 21 Ft.
Maximum length of 4" diameter flexible metal duct
0 36 Ft. 28 Ft.
1 31 Ft. 23 Ft.
2 27 Ft. 19 Ft.
3 25 Ft. 17 Ft.
4 23 Ft. 15 Ft.
Dimensions are for planning purposes only.
For complete information, see installation
instructions packed with product.
CWLL119To locate a distributor near you, please visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS