7
Cycle Guide
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best ts the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
* All rinses are cold.
No clothes in
washer
Clean
Washer
with
affresh
®
Hot
Warm
Cool
Cold
Tap Cold
High
Low
No Spin
Extra
Heavy
Heavy
Medium
Light
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
affresh
®
Washer Cleaner tablet or liquid
chlorine bleach to thoroughly clean the inside
of your washer. This cycle should not be
interrupted. See “Washer Care.”
IMPORTANT: Do not place garments or other
items in the washer during the Clean Washer
with affresh
®
cycle. Use this cycle with an
empty wash tub.
Heavily soiled
fabrics
Soak Hot
Warm
Cool
Cold
Tap Cold
No Spin Extra
Heavy
Heavy
Medium
Light
Use this cycle to soak small spots of set-in
stains on fabrics. After time has expired,
washer will drain, but will not spin and a
tone will sound. To set a follow-up cycle,
add additional detergent and select a cycle
based on fabric type.
Hand-washed
garments or dripping
wet items
Drain &
Spin
N/A High
Low
No Spin
N/A
This cycle uses a spin to shorten drying
times for heavy fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
Swimsuits and items
requiring rinsing
without detergent
Rinse &
Spin
Tap Cold High
Low
No Spin
N/A
EcoBoost
™
Fabric Softener
Combines a rinse and high speed spin for
loads requiring an additional rinse cycle or
to complete a load after power interruption.
Also use for loads that require rinsing only.
Items to wash: Cycle: Wash Temp*: Spin
Speed:
Soil
Level:
Available
Options:
Cycle Details: