Filter
Top Products
FUNCTION BUTTONS
Intensive rinse
You can have one more rinsing done in addition to the rinses
which your machine has made in all washing programs by
using this function.
Start delay
The timer function enables you to set your machine to start
its wash operation with delay. Depending on the delay time
you wish the programme to start at press the function button
until the desired delay timer lamp (1h/3h/5h/7h) lights up on
the control panel. The lamp above the function button will
flash. Start the programme by pressing the start/hold button.
Rinse hold
This function is recommended to be used when the clothes
cannot be taken immediately after the end of the
program.This will prevent occurrence of wrinkles. When this
button is pressed, the last rinsing water is not drained. For
the program to continue from the start pause, repress the
start pause button.
WARNING!
If you have forgotten to use an additional function and the machine has
started the wash operation press the button of the additional function
you wish to select; if the indicator lamp above it keeps lighting the
additional function you selected will become active. If the lamp stays lit
for a certain while and then goes out the additional function you
selected will not become active.
NOTE: Our products contain electronic cards and touchscreen buttons.
Lightly pressing on the buttons will suffice to activate the
functions.
9