Whirlpool AL6245V Washer User Manual


 
Using special model features
AL4132 Large-Capacity, Single-Speed Washer
(Check under washer lid for model number.)
AL5143 Large-Capacity, Single-Speed Washer
(Check under washer lid for model number.)
Load sizes and water levels
AL4132
Set water level selector to the level that
describes the size of your load: SMALL
or LARGE.
AL5143
Set water level selector to the level that
describes the size of your load: SMALL,
MEDIUM or LARGE.
AL6245
Set water level selector anywhere on or
between EX-SMALL and EX-LARGE.
How to add bleach
For Model AL4132 only.
Let the washer fill and begin agitating
the load and detergent.
Dilute measured bleach in 1 quart (1L)
of water.
Pour bleach around agitator. Do Not
pour directly on load.
AL6245 Large-Capacity, Two-Speed Washer
(Check under washer lid for model number.)
Using the bleach dispenser
For Models AL5143 and AL6245 only.
First, load washer.
Carefully pour measured bleach into
dispenser. Do Not use the dispenser as
a measuring device. Do Not let bleach
touch clothes.
Start the washer. Bleach will be diluted
during the wash cycle.
Cleaning lint filter
For Model AL5143 only.
Clean lint filter after every load.
Lift up agitator barrel.
Wash or wipe the filter clean (located in
bottom of the agitator barrel). The filter
is not removable.
Snap the agitator barrel back into place.
Self-cleaning lint filter
For Model AL6245 only.
The lint filter in your washer cleans
itself by draining lint away with the
wash and rinse water. Remove any lint
collected in the tub drain or strainer.
Page 5