Filter
Top Products
13
Reverse DoorSwing
You can change your door swing from a right-side opening to a
left-side opening, if desired.
1. Place a towel or soft cloth on top of the dryer or work space
to protect the surface.
Remove the door assembly
1. Remove the 4 screws that hold the door hinge on the front
panel of the dryer.
2. Lay the door assembly on a flat, protected surface with the
inside (inner door assembly) facing up.
3. Remove the 6 Phillips head screws to release the outer door
assembly from the inner door assembly, as indicated below.
See illustration. It is important that you remove only the
6 indicated screwd.
L83.3(i)-5.7fat fhe ier ndoor as of15(f at).6(h)57(e ou83.3(t)67e)-2.7er ndoor as
in-12.5gaon(g )13.3tae64.9bs(r)-9.5(o)3.9tae64.9tiogiogce64.9lis