Filter
Top Products
21
Additional Features
WRINKLE SHIELD™ Feature
When you are unable to remove a load of clothes from the dryer
as soon as it stops, wrinkles can form. The WRINKLE SHIELD™
feature periodically tumbles, rearranges and fluffs the load to help
keep wrinkles from forming.
■ Press the WRINKLE SHIELD™ feature to get up to
120 minutes of heat-free, periodic tumbling at the end of a
cycle.
■ Stop at any time by pressing the WRINKLE SHIELD™ feature
or opening the dryer door.
■ For the Casual Cycle, the WRINKLE SHIELD™ feature is
preset to “ON.” The other Automatic Cycles will retain the
WRINKLE SHIELD™ feature setting. (For example, if you
select the WRINKLE SHIELD™ feature in the Normal cycle,
the WRINKLE SHIELD™ feature will be on the next time you
select the Normal cycle.)
NOTE: If you do not select the WRINKLE SHIELD™ feature, the
dryer stops after the cool down period.
Temperature
Temperature settings are used with the Manual Cycles. Press
TEMPERATURE until the desired temperature setting glows.
Temperature settings cannot be used with the Automatic Cycles.
Air Only
Use the Air Only setting for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This chart
shows examples of items that can be dried using Air Only.
*Reset time to complete drying, if needed.
When using Air Only
■ Check to see that coverings are securely stitched.
■ Shake and fluff pillows by hand periodically during the cycle.
■ Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic Cycles are not available when using the Air
Only setting.
Signals
The Dry Only setting produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
The Damp & Dry Signal is useful when drying bedsheets/linens in
a mixed load or large items in the “Bulky Items” cycle. When the
signal sounds, rearrange the load inside the dryer, close the door
and restart the dryer to finish the drying cycle. Rearranging the
load will aid in the drying process.
For the “Bulky Items” cycle, “Damp & Dry” is preset to ON.
Press and release the SIGNALS button to change the setting.
NOTE: When the WRINKLE SHIELD™ feature is selected and the
Signals setting is on, an audible sound will be emitted every
5 minutes until the clothes are removed, or the WRINKLE
SHIELD™ feature is finished.
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20