Filter
Top Products
4
0"**
0"**
15"
** Wall, door and floor molding may require
additional spacing.
Recessed area
installation
Closet/confined area
installation
Exhaust dimensions
3"
3"
24 sq.in.***
Front view
1"
closet door
*** Minimum top and bottom air openings
for closet door.
**** External exhaust elbow requires
recommended spacing.
Side view
14"
max.
spacing
5" is recommended ****
0" is minimum
No other fuel-burning appliance
may be installed in the same closet
or recessed area.
• If codes permit, dryer may be
If a closet door is installed: The
minimum unobstructed air openings
are required. Louvered doors with
equivalent air openings are
acceptable.
Installation clearances.
Use recommended clearance for
easier installation.
Dryer dimensions
14"
6-1/4"
1-1/2"
A grounded electrical outlet is
required within 4-1/2 feet for the
power supply cord.
gas line
opening
The dryer door
extends 14" from the
front of the dryer
when fully opened.
29-1/4"*
(models with flush
mounted door handle)
30-1/4"*
(models with extended
door handle)
43-1/8"
11"
38-1/4"
27"
Dimensions shown with feet extended 1"
from bottom of dryer.
*Most installations will require at least 5"
clearance behind the dryer for the dryer vent.
installed in a recessed area or closet
using dimensions shown.
• Dimensions are in inches and are the
minimum allowable. Detailed space
requirements can also be found on
the label on the back panel of the
dryer. These requirements ensure
minimum clearances to combustible
construction, and prevent blockage of
air into the combustion chamber.
• Additional spacing should be
considered for ease of installation
and servicing. Companion appliance
spacing should also be considered.
Installation clearances.
Use recommended clearance for
easier installation.
Front view
48 sq.in.***
14-1/8"
7-1/4"
left or right side
exhaust
bottom exhaust
back exhaust
4-1/4"
10-1/4"
14-1/8"
4"
Recommended/minimum
Back Sides Top Front
Recessed (5"/0") (1"/0") (18"/15") —
Closet (5"/0") (1"/0") (18"/15") (1"/1")