Filter
Top Products
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
Parts supplied:
Tools needed for securing the drain hose and leveling
the washer:
Parts supplied:
Alternate Parts
Your installation may require additional parts. For ordering
information, please refer to the toll-free phone numbers on the
front page of the Washer User Instructions.
■ Pliers that open to
3.95 cm (1⁹⁄₁₆")
■ Flashlight (optional)
A. Drain hose form
B. Water inlet hoses (2)
C.Flat water inlet hose washers (4)
■ Adjustable or open end
wrench 14 mm (⁹⁄₁₆")
■ Level
■ Wood block
■ Ruler or measuring tape
A.Beaded tie strap
B. Front leveling feet with nuts (2)
AB
C
A
B
If You Have: You Will Need to Buy:
Laundry tub or
standpipe taller
than 2.4 m (96")
Sump pump system (if not already
available)
2.5 cm (1")
diameter
standpipe
3.2 cm (1¹⁄₄") diameter to 2.5 cm (1")
diameter standpipe adapter,
Part Number 280130
Overhead sewer Standard 76 L (20 gal.) 99 cm (39") tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
1.8 m (6 ft) Part Number 76314,
3.0 m (10 ft) Part Number 350008
Drain hose too
short
Drain hose kit, Part Number 280131
Lint clogged drain Drain protector, Part Number 367031