Filter
Top Products
- - - - - - -~ --~
iiistructfons
This washer may be installed in a
recessed area or closet.
The installation spacing is minimum
allowable.
Additional spacing should be
considered for ease of installation
and servicing.
If closet door is installed, the
minimum air openings in top and
bottom are required. Louvered
doors with air openings in top and
bottom are acceptable.
Companion appliance spacing
should be considered.
If you need
assistance...
Call your dealer or local
authorized service company.
When you call, you will need the
washer model number and serial
number. Both numbers are on the
serial/rating plate located under
the washer lid and on the top of
the washer.
Part No. 3350975 Rev. B
0 1995 Whirlpool Corporation
(4A7hil)
T
I
00
Closet door
Closet door
(Oxl)
Ll
[LB cm min.)
48 sa. In.
(310 sq.cm)
l
Addltlonal clearances tar wall, door
and tloor moldlngs may be required.
Front view
(door not shown)
Side view
Minimum installation spacing
Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022
Front view
3”
(7.6 cm)
Printed on recycled paper.
10% post consumer waste/
50% recovered materials.
Printed in U.S.A