Whirlpool 3LE5710XM Washer/Dryer User Manual


 
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, pillows and clothing or to
dust drapes.
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
It can also be used to damp-dry
heat sensitive itemssuch as plastic
shower curtains, rubber-backed
rugs, plastic tablecloths, foam rubber
pillows, stuffed toys, sneakers, etc.
1. Set the Temperature Selector to
1. Set Temperature Selector to PERM’T
FLUFF AIR.
PRESS/HEAVY HIGH.
2. Set the Control Knob to the PERMA-
2. Set Control Knob to TUMBLE PRESS.
NENT PRESS Cycle and select the
3. Push START Button.
number of mintues you want,
The load will tumble in heated air
3. Push the START Button,
for 5 minutes. The heat shuts off and the
dryer continues to tumble the load
Mixed loads
for 10 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Drying times
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of load.
When drying a load with different
l
room temperature around the dryer.
kinds and weights of fabrics, use the
l
temperature of the wash rinse water.
cycle suggested for the lightest fab-
l
amount of lint in the lint screen.
rics. When the dryer stops, remove dry
items and reset the control.
l
dryer temperature selection.
See your “Dryer Guide” for more
information.