Filter
Top Products
loading your
Dryer
4
For best dryrng results and energy
savings, sort dryer loads carefully
Separate loads
according to
the type of fabric and weight For
example
l
Dry heavy fabrics (denims. towels,
cottons) separately from light fabrrcs
(permanent press, synthetics)
l
Separate lent givers (towels, sweat-
shirts, etc ) from lent takers (synthetics,
blends permanent press]
l
Keep dark colors and light colors
separate
l
Keep colorfast items away from non-
colorfast fabrrcs.
Allow room
for Items to tumble
freely The load WIII dry faster wtth fewer
wrrnkles
When dryrng permanent press,
dry smaller-than-normal
loads for the
best wrinkle removal
Use a mesh bag
to hold small
Items such as baby socks
Read the Dryer Guide
for more
hints on sorting and loading
In all these cycles, the heat shuts
off 5 minutes before the dryer stops
tumbling. This helps cool down the load
The cool-down trme IS burlt In so
the laundry will not be too hot when the
dryer stops tumblrng
1 When a load of hot laundry is
not tumbling, wrinkles can set In.
2. A load of hot laundry can
be too hot to handle comfortably
The other cycle is PERMANENT
PRESS This cycle has a longer cool-
down time at the end This extra time IS
designed to give permanent press fab-
rics the extra wrinkle protection they
need
Thts Use & Core Gude contains
suggestions on the way to use your dryer
to get the best results and longest useful
life from Your dryer Please read It
carefullv
lint Screen
The lint screen IS under the Ird on
top of the dryer
C/eon the hnt screen before each
ioad A screen that’s blocked by lint
can cause longer drying times
Understanding
your Dryer
Your dryer has five cycles The
EXTRA HEAVY. HEAVY, MEDIUM and
LIGHT Cycles are designed to tumble
laundry for a certain length of
time. .dependrng on the load You
select the drying temperature you want
To remove the screen. open the
IId and pull the screen straight out. Roll
the lint off the screen with your fingers
DO NOT rinse the screen or wash
it.
Wet lint IS hard to remove
When replacing the screen, push
it firmly into place Close the IId
3