Filter
Top Products
Other operating instructions
For a rinse and spin
When using extra detergent for
heavily soiled clothes, or washing
special-care items, you may want
an extra rinse and spin.
1. Push Control Knob in.
2. Turn clockwise to one of the dots
on the dial, as illustrated.
3. Pull Control Knob out. The washer
will fill to selected level, agitate
2 minutes, drain and spin.
For a drain and spin
A drain and spin may help shorten
drying times for some heavy fabrics
or special-care items by removing
excess water.
1. Push Control Knob in.
2. Turn clockwise to any bar just
before an OFF area on the dial,
as illustrated.
3. Pull Control Knob out. The washer
will drain and spin.
For agitation and spin speeds in each cycle, see pages 6-11.
For best results, use warm water for
soaking stained laundry. Hot water
can set stains.
1. Use recommended amount of
pre-soa k product or detergent.
2. Push Control Knob in.
3. Turn clockwise until indicator
points to the number nex-t to SOAK
4. Pull Control Knob out. The washer
will start.
5. When the cycle is over, add
detergent for the next selected
wash cycle. The SOAK Cycle
should always be followed by
a wash cycle.
NOTE: See the Laundry Guide for
additional soaking information.
To start soak with agitation, the Control Knob
must point to a number in the SOAK Cycle.
12