Whirlpool 3950319 Washer User Manual


 
9
Rinse and Spin
When using extra detergent for heavily soiled clothes, or
washing special-care items, you may find an extra rinse
and spin is needed.
1. Push in the Cycle Control knob and turn it clockwise to
any of the Rinse settings.
2. Pull out the Cycle Control knob. The washer fills to the
selected load size, agitates, drains, and spins.
NOTE: An EXTRA RINSE option is available (on some
models). See “Starting your washer.”
Drain and Spin
A drain and spin may help shorten drying times for some
heavy fabrics or special-care items by removing excess
water.
1. Push in the Cycle Control knob and turn it clockwise to
any of the Spin settings.
2. Pull out the Cycle Control knob. The washer drains,
then spins.
CARING FOR YOUR
WASHER
Cleaning Your Washer
Cleaning the exterior
Use a soft, damp cloth or sponge to wipe up any spills
such as detergent or bleach. Occasionally wipe the
outside of your washer to keep it looking new.
Cleaning the interior
Clean your washer interior by mixing 1 cup (250 mL) of
chlorine bleach and 2 cups (500 mL) of detergent. Pour
this into your washer and run it through a complete cycle
using hot water. Repeat this process if necessary.
NOTE: Remove any hard water deposits using only
cleaners labeled as washer safe.
Cleaning the liquid fabric softener dispenser
Flush dispenser periodically with warm water, as shown.
Remove the dispenser by grasping the top of the
dispenser with both hands and squeezing and pushing
upwards with thumbs. Clean the dispenser by rinsing it
under a water faucet. Replace it after cleaning.
NOTE: Do not wash clothes with this dispenser removed.
Do not add detergent or bleach to this dispenser; it is for
liquid fabric softener use only.