Filter
Top Products
23
Troubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following
list for common laundry problems and the next page for common dryer problems. If you
need further assistance, see “Requesting Assistance or Service” on page 25.
Common laundry problems
PROBLEM
Greasy spots
Lint
Shrinking
Slow drying
or clothes
still wet
Stains
Static
electricity
Wrinkling
CAUSE
• Dryer fabric softener improperly used. See manufacturer’s directions.
• Drying soiled items.
• Full lint screen. (See page 14.)
• Load not properly sorted.
• Overdrying, especially synthetic fabrics that cause lint-attracting
static electricity.
• Load size too big or heavy.
• Tissue or paper left in pockets.
• Pilling (surface fuzz caused by normal wear and laundering)
attracts lint.
• Overdrying.
• Fabric type and quality inappropriate for drying.
• Dryer settings incorrect for fabric type.
• Manufacturer’s care label instructions not followed.
• Full or clogged lint screen. (See page 14.)
• Load too large and bulky to dry quickly.
• Dryer located in room with temperature below 7°C (45°F).
• Exhaust duct clogged, restricted, or too long.
• Drying soiled items.
• Dryer fabric softener improperly used. See manufacturer’s directions.
• Overdrying.
• Dryer fabric softener improperly used. See manufacturer’s directions.
• Load includes synthetics, synthetic blends, permanent press, and knit
fabrics that build up static electricity.
• Overloading.
• Overdrying, especially permanent press, and synthetic fabrics.
• Clothes left in dryer at end of cycle.