Filter
Top Products
End-of-Cycle signal
(on some models)
The dryer sounds a signal to
let you know when the cycle is
finished. The signal is helpful
when you are drying perma-
nent press, synthetics, and
other items that should be removed from the
dryer as soon as it stops.
l
On some dryers, the end-of-cycle signal is
not adjustable.
l
On other dryers, the end-of-cycle signal
can be turned On or Off by a selector. The
end-of-cycle On/Off selector is part of the
Start Button on some models, and part of
the FINISH GUARD@ selector on other
models. The various types of selectors are
described in the chart below.
Using End-of-Cycle signal and
FINISH GUARD feature
(on some models)
Your model may have any of the following:
If your dryer has the end-of-cycle signal
l
Separate
knob
selectors for end-of-cycle
and/or FINISH GUARD feature, they may be
signal and FINISH GUARD feature.
turned On or Off as shown below.
l
A combination
knob
for both features.
NOTE:
Unless you turn off the FINISH
l
CLEAN TOUCHTY pushbutton
pad for
GUARD feature, it operates at the end of
both features.
the cycle.