Filter
Top Products
Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information. Page references are included for more information.
Starting your washer
1. Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer.
l Sort and load clothes as described on
pages 12 and 13.
l If desired, you may also add color safe
bleach or extra detergent for the Super
Wash cycle.
2. (OPTIONAL STEP) If desired, pour
measured liquid chlorine bleach into
the bleach dispenser. See page 10.
l Use only liquid chlorine bleach in the
bleach dispenser.
3. Close the washer lid.
4. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
l The Load Size Selector has three load
size settings: small, medium, and large.
l To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
5. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type of
fabric and soils being washed.
l See page 14 for water temperature
guidelines.
l Three wash-rinse temperatures are
available: hot-cold, warm-cold, and
cold-cold.
Medium
I
Load Size
iki
Temperature
continued on next page
5