Filter
Top Products
Understanding what happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation occurs with
the washer lid up or down.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to an OFF area
and the cycle ends.
NOTE: The washer pauses briefly through-
out each cycle. These pauses are normal for
washer operation.
WASH RINSE
Fill
Fill
Wash selected time
1;
w
II
Rinse
Drain*
No agitation
*The Permanent Press cycle partially
drains, fills, aqitates briefly, and drains
Spin
Drain - No agitation
I23
4
Spin-Spray rinse
LJ
.4t
Spin
In]
Off
Manual clean lint filter
Your washer has a manual clean lint filter.
Clean the filter at the bottom of the agitator
after every load for the best filtering results.
To
clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the
bottom of the agitator barrel. The filter is
not removable.
3. Replace the agitator barrel and snap it
into place.
I I
Agitator barrel
Manual clean
lint filter
10