6
How to install your dryer
Now that you’ve unpacked your dryer, check
to be sure you have removed the parts bag
from the drum. Remove the tape that holds
the drum to the cabinet. Move the drum by
hand to make certain all tape has been
removed. Next, wipe the interior of the drum
thoroughly with a damp cloth before using
the dryer.
Installation
To install your dryer, you will need the tools
shown. All the parts you need are packed in
the appliance. When you take them out,
place them on a cloth so you won’t lose
them.
Parts supplied with the dryer:
1 Cycle and temperature control (timer)
knob
1 Push to Start button
4 Leveling legs
Adjustable
wrench
Level Flashlight
(optional)
1
⁄4-inch
nut driver
#2 Phillips
head
screwdriver
Wire
stripper
Duct
tape
Flat-head
screwdriver
INSTALLATION INSTRUCTIONS
3977625v09c27 4/1/99 4:45 PM Page 6