Whirlpool 200 Washer User Manual


  Open as PDF
of 5
 
unlocked. It will try to unlock the door 6 times before
displaying the error.
Potential Causes
• Door Lock Mechanism broken.
• Check Door Lock/Switch Assembly for foreign objects
• Check Wire Harness connections to the Door
Lock/Switch Assembly and Central Control Unit (CCU)
• Door Lock/Switch Assembly Failure
Replace failed component.
Note: The door lock/switch assembly can be manually
unlocked.
To Manually unlock the door lock system:
1. Unplug the power cord from the outlet.
2. Remove the lower toe panel.
3. Reach up along the inside of the front panel and locate
the bottom of the door latch assembly.
4. Located on the bottom of the door latch assembly is a
tear-drop shaped tab.
5. Gently pull the tab down about 1/4 inch or until a click
is heard.
6. The door may now be opened.
 previous