Filter
Top Products
8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of heavy soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment and into the
compartment marked if you have selected the
“prewash” option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
C0071
C0070
P0004
3. Select the required programme
Turn the programme selector dial to the programme 1.
The light “start pause” starts to flash
.
The pilot lights
corresponding to the various phases making up the
programme come on.
4. Select “spin reduction” or
“no spin” option
Press the option button repeatedly, to select the desired
option. The relevant light illuminates.
5. Select the required option
Select “prewash” or “rinse hold” option if required, the
corresponding light illuminates.
half
load
prewash rinse
hold
no spin
spin
reduction
1
4
5
6
7
8
2
3
10
13
9
15
12
14
11
PROGRAMME
132994650.qxd 7/26/02 9:41 AM Pagina 8 (Nero/Process Black pellicola)