Filter
Top Products
7
7 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
pilot light stays on.
When the pilot light “wash” comes on this means that
the machine is performing the washing phase. If you
have selected the “prewash” function, this light will be
on during the prewash phase too.
The “End” light flashes in the event of operating
problems:
●
4 flashes: door open
●
2 flashes: problem with water draining
●
1 flash: problem with water supply
For more information see paragraph “Something not
working”?
The “door” pilot light indicates if the door can be
opened:
- light on: the door cannot be opened
- light off: the door can be opened
- flashing light: the door is opening
It stays on during the whole programme indicating that
the door is locked.
When the light goes out, the door can be opened.
8 Programme selector dial
The selector dial can be turned either clockwise or
anticlockwise.
Position O corresponds to to Reset programme
/Switching OFF of the machine.
ATTENTION!
If you turn the programme selector dial to another
programme when the machine is working, the lights of
the programme progress display start to flash. The
machine will not perform the new selected programme.
Programme information
The wool wash cycle of this machine has been approved
by Woolmark for the washing of machine washable
Woolmark products provided that the garments are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washing machine. M9604.
This is a complete programme to be used for lightly
soiled laundry or for laundry which needs freshening up
(not available for wool).
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
short spin at the speed selected by means of the relevant
button.
For emptying out the water of the last rinse in
programmes with the RINSE HOLD option.
Turn first the programme selector dial to O, then select
Drain programme 14 and depress the Start/Pause
button.
Separate spin for hand washed garments and after
programmes with RINSE HOLD option. Before
selecting this programme the selector dial must be
turned to “O”. You can choose the speed by means of
the relevant button to adapt it to the fabrics to be spun.
15 = Spin
14 = Drain
13 = Rinses
12 = Quick and cool
10 = Wool
35.292.987….AW1201-1401.qxd 30/06/2005 19:08 Página 7