TG-3468
Gigabit PCI Express Network Adapter
2
Chapter 1. Introduction
1.1 Overview of the product
The TG-3468 10/100/1000Mbps PCI EXPRESS Gigabit Network Adapter is a highly integrated
and cost-effective Gigabit Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u
and IEEE 802.3ab specifications.
TG-3468 keeps low cost and eliminates usage barriers. It is the easiest way to upgrade a network
from 10/100Mbps to 1000 Mbps. It supports 10/100Mbps network speed automatically both in
Half-Duplex and Full-Duplex transfer modes, and 1000Mbps in Full-Duplex transfer mode,using
Auto-Negotiation technology to detect the network speed.
1.2 Features
Integrated 10/100/1000Mbps transceiver
Support PCI Express 1.1
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE802.3ab
Auto-Negotiation with Next Page capability
Support pair swap/polarity/skew correction
Crossover Detection & Auto-Correction
Wake-on-LAN and remote wake-up support
Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation
Task-offload (Large send v1 and Large send v2) support
Support Full Duplex flow control (IEEE802.3X)
Support IEEE 802.1p Layer 2 Priority Encoding and IEEE802.1Q VLAN tagging
Support power down/link down power saving
Support drivers for Windows XP (32bit/ 64bit), Windows Vista (32bit/ 64bit), and Windows 7
(32bit/ 64bit)
1.3 LED Status
There are three LEDs, including a 10Mbps Link/Act LED, a 100Mbps Link/Act LED, a 1000Mbps
Link/Act LED.
The Link/Act LEDs of TG-3468 PCI EXPRESS 10/100/1000M LAN Card indicates Link/Act
status. They will light when connection has been built, and glitter when the adapter transmits
or receives data.