Filter
Top Products
8
3 Close the lid and press the START button.
• To use drain only, leave the lid open.
After error display appears, turn the power off.
CUSTOM WASH CYCLES
You can select the operation that you want — such
as spin only or rinsed water reuse.
"OVERFLOW RINSE" cycle
OVERFLOW RINSE cycle compared to normal washing, is one
rinse more (total 3 times) and last rinse becomes overflow rinse.
• When set once, it is written in memory and starts with overflow
rinse from the next time.
WASH
RINSE
SPIN
Press once
Re-using washed water.
Melting a detergent
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
Press 8 times
Press 9 times
Press 10 times
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
WASH
only
RINSE
only
RINSE
OVERFLOW RINSE
SPIN
only
DRAIN
only
WASH
and
RINSE
WASH
RINSE
OVERFLOW RINSE
WASH
SPIN
RINSE
and
SPIN
RINSE
OVERFLOW RINSE
SPIN
WASH
RINSE
OVERFLOW RINSE
SPIN
Performing rinse only for
articles which have
been washed.
(Spinning will start
before rinsing)
Spin only for hand-
washed articles.
(Draining before spin-
ning.)
Draining water from the
tub.
Removing clothes with-
out spinning to prevent
wrinkling, or reusing the
softener.
Washing clothes with
different soil separately
and spinning.
Performing rinse which
have only been washed.
(Spinning will start
before rinse)
WASH
RINSE
OVERFLOW RINSE
SPIN
Rinsing perfectly at the
regular washing cycle.
At the RINSE cycle, the
water is automatically
added.
Regular washing
Rinsing the washed
clothes perfectly.
(Spinning will start
before washing.)
Washing the easily
wrinkled clothes without
spinning.
Reusing the softener.
Rinsing perfectly and
spinning only. (Spinning
will start before wash-
ing.)
2
3
1
The process cannot be changed after pushing the START.
Turn the POWER supply off and on in order to change course.
1 Tu rn the POWER on.
Put the laundry in the basket and select your favorite cycle or water level.
2 Set the custom wash cycle.
When flowing water amount is
small, the tank may not be
filled up.
For the shower rinse, it needs twice for the process.
But for the static rinse, it needs only once.
1 Press
button.
2 Press the button and hold for 5 seconds.
The buzzer sound will be heard and the course will be set within 5
seconds. After that, turn off the washer.
NOTE • Never press
and button in the same time.
• Follow this instruction for the shower rinse, and the buzzer sound will
be heard.
• After the setting, the washer will keep the setting in memory. So it is not
necessary to reset every time.
If you wish to change the shower rinse to the static rinse
SHOWER RINSE CYCLE means during stirring,
flowing water and rinsing are executed
simultaneously.
6348100701 (07-10) 12/11/08, 8:54 AM8