Toastmaster 3302MEX Iron User Manual


 
4.
Steam and Dry Iron Use and Care Guide
Using As A Dry Iron
The iron can be used on the dry setting with or without water in the
tank, however it is best to avoid having the tank too full of water while
dry ironing.
1. Position temperature control dial to OFF.
2. Turn the variable steam dial to OFF.
3. Stand the iron on its heel in an upright position on an iron-safe
surface and plug it in.
4. Turn the temperature control dial to the desired setting.
5. When the ready light turns off, the iron has reached the desired
temperature.
6. When finished, turn temperature control dial to OFF and unplug.
Allow the iron to cool before cleaning the exterior or storing.
Note: During ironing, the ready light may turn on again which indicates
that the iron is heating up to maintain the proper temperature.
CAUTION: If the iron has been used for a long time and is hot, DO
NOT fill it with water.
Using As A Steam Iron
1. Position temperature control dial to OFF.
2. Position the variable steam dial to OFF.
3. With the unit UNPLUGGED, fill the iron with water.
(See FILLING THE WATER TANK instructions.)
4. Stand the iron on its heel in an upright position on an iron-safe
surface and plug in.
3302,CAN&MEX_IB_29-3-05 3/29/05 5:29 PM Page 4