Filter
Top Products
5.
5. Turn the temperature control dial to desired setting.
6. Allow approximately 2 minutes for the iron to reach the desired
temperature. (The ready light will turn off.)
7. Turn the variable steam dial clockwise to the desired amount of
steam. As soon as the iron is held horizontally, steam will flow
through the vents. If the iron does not steam, gently tap the
soleplate on the ironing surface. Placing the iron on its heel in
an upright position interrupts the flow of steam.
8. When finished, turn temperature control dial to OFF and
variable steam dial to OFF, and unplug. Allow to cool before
cleaning the exterior of the iron and storing.
CAUTION HOT SURFACES: Avoid coming in contact with escaping
steam.
Filling The Water Tank
1. Unplug the iron before filling.
2. Turn the variable steam dial to OFF.
3. Hold the iron in the horizontal position (see Figure 2).
4. Using a measuring cup, slowly pour water into the water fill
opening (see Figure 2).
5. Check see-through water tank to see if iron is filled to maximum
fill line (see Figure 3). Note: Your iron is designed to use tap water. DO
NOT use water from home water softening systems because such water may
contain minerals that may harm the iron.
3302,CAN&MEX_IB_29-3-05 3/29/05 5:29 PM Page 5