Filter
Top Products
10
There is no steam or there is
little steam.
The water tank is
empty (red light on).
Fill the water tank.
The steam output control dial is
set at minimum.
Increase the steam output (control dial on the
control panel).
The soleplate temperature is set to
the maximum.
The generator is working but steam is very hot and
dry As a consequence, it is less visible.
The red “water
tank empty” light is on.
The water tank is empty. Fill the water tank.
Steam escapes from the rinse
plug.
The rinse plug has not been tightened
correctly.
Tighten the rinse plug correctly.
The rinse plug seal is damaged. Contact an Approved Service Centre to order a new
rinse plug seal.
Steam or water escapes
under the appliance.
The generator is faulty. Stop using the generator and contact an Approved
Service Centre.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and
advice: 0845 602 1454 - UK
(01) 461 0390 - Ireland
or consult our website - www.tefal.co.uk